solution adhesive
英 [səˈluːʃn ədˈhiːsɪv]
美 [səˈluːʃn ədˈhiːsɪv]
网络 溶液粘着剂
双语例句
- The prepared ink has good solution viscosity, surface force, solvent resistance and adhesive capacity.
墨水溶液粘度、表面张力及耐溶剂性能、粘附性能均较佳。 - Apply soap solution liberally to adhesive backing of stripe.
将丰富的肥皂溶液涂到饰条胶合剂背面。 - Study on solution synthesis of polyurethane as shoe adhesive& technology of synthesis and properties of product
溶液法合成聚氨酯鞋用胶研究&合成工艺与产品性能 - The present paper aims at investigating the photocatalytic degradation of aqueous phenol solution in the fixed bed photo reactor by using the cement adhesive catalyst TiO 2 under a high pressure mercury lamp.
以高压汞灯为光源，研究水泥固定TiO2在光反应器内光催化降解苯酚水溶液。 - The comparative results show that the present solution has better accuracy because the influences of the behaviors of reinforced concrete beam, adhesive and strengthening plate on the interfacial shear stress are all considered.
研究结果表明：由于表达式考虑了混凝土梁、粘结胶层和加固片材性能对界面粘结剪应力的影响，因而具有更高的计算精度； - Add all the materials into rapid granulator, add 10% EC alcohol solution as adhesive, obtain roundness granules;
原辅料加入快速制粒机中搅拌均匀，加入10%EC乙醇溶液为粘合剂，制成圆整的小粒； - The method and adhesive process for Sodium-Naphthalene solution activating Polytetrafluorethylene ( PTFE) surface were described, and the properties of adhesive were tested.
叙述了钠&萘溶液活化聚四氟乙烯表面的方法和粘接工艺，并测试了粘接件的主要性能。 - The experimental research on the solution of the problem in the course of the coating of the emulsion paper-plastic composite adhesive
乳液型复膜胶存在问题及解决方法的实验研究 - The experimental results showed that Brookfield viscosity of dip solution was decreased with the increase of temperature, and the dip pick-up and adhesive strength were increased with the increase of Brookfield viscosity.
试验表明：浸胶液布氏粘度随温度的升高而降低，而附胶量及粘着强度随布氏粘度的增大而增大。不同品种帘子布浸胶液的布氏粘度分别为：930dtex。 - The kinds and contents of SBS solvents, tackifiers and softeners are tested, The formula of Solution type SBS Pressure sensitive adhesive is abtained, uses of the Product are inducted.
试验了SBS、溶剂、增粘树脂和软化剂品种以及用量不同对胶液性能的影响；通过试验确定了基础配方；并介绍了投放大生产后产品供用户使用情况。 - The production technology of adhesive polychloroprene rubber abroad was reviewed with 23 references. The differences in crystallization rate, solution adhesiveness, service life and slab thickness between domestic adhesive polychloroprene rubber ( LDJ 240) and foreign analogs ( A-90) were discussed.
比较了国产粘接型氯丁橡胶（LDJ240）与国外类似产品（如A-90）在结晶速度、溶液粘度、适用期和胶块厚度等方面的差别。 - Preparation of Solution type SBS Pressure sensitive adhesive
溶液型SBS压敏胶粘剂的研制 - Wanshi Niuhuang Qingxin pellets with perfect shape and surface characteristics were prepared in a centrifugal granulator by using MCC as filler and 3% HPMC solution as adhesive agent under optimum condition.
以MCC为稀释剂，3%HPMC水溶液为粘合剂，采用离心造粒法，在优化条件下可制得表面较为光滑、圆整度较高的万氏牛黄清心微丸。 - The paper modified studies the formulation of aqueous vinyl polymer solution-isocyanate adhesive ( API), which improve comprehensive operational performance.
本论文的主要研究目的是对水性高分子&异氰酸酯胶粘剂（API）进行改性研究，以提高其综合性能。 - After degraded by oxidation process, polyvinyl acetals, prepared from acetalation of PVA with aldehydes in aq. alcohol solution under acid conditions, can be directly used for adhesive and coating.
聚乙烯醇（PVA）在乙醇水溶液中在酸性条件下与醛类缩醛化制成PVA缩醛的乙醇水溶液。 - Nanometer anatase TiO 2 solution was used with silica sol added as adhesive at different ratios to prepare TiO 2 thin film on ceramic substrate by pulling method. The prepared TiO 2 thin film was annealed at high temperature.
利用锐钛矿晶型的纳米TiO2胶体溶液，将硅胶作为粘结剂按不同配比加入TiO2胶体，用提拉法在陶瓷表面形成均匀薄膜并在高温下烘烤成膜。 - Methods Heart protecting musk dispersible tablets were prepared by selecting PVPP as disintegration, MCC as filler, CMC Ca as sweller and 1% HPMC solution as adhesive agent.
方法以PVPP为崩解剂、MCC为填充剂、CMCCa为溶胀性辅料、1%HPMC水溶液为粘合剂，制备麝香保心分散片； - Curable Acrylate Solution Adhesive-Development of the Adhesive for compounding Polypropylene Film and the Paper with Printing Ink
可固化丙烯酸酯溶液型胶粘剂&聚丙烯薄膜同印刷油墨纸复合用胶粘剂的研制 - The exchange reaction is proved by the experiment of solution of the product in polyester adhesive agent and the analysis of infrared ray analyzer.
用聚酯胶的溶剂对所得产品进行溶取试验并且通过红外光谱分析都证明了链交换反应的存在。 - Liquid acrylate oligomers containing carboxyl groups with BA and AN as main chain structure were synthesized by solution polymerization, and used for toughening modification of bisphenol A epoxy resin adhesive.
采用溶液聚合法合成了以BA、AN为主链结构的液态含羧基丙烯酸酯低聚物，并用其对双酚A型环氧树脂胶黏剂进行增韧改性。 - The internal flow drag reduction property of inwall of lower adhesive work was investigated by treating the inwall of glass conduit with absolute diethyl ether solution of vinyl triethoxy silicane to depress the adhesive work between the inwall and fluid water.
以乙烯基三乙氧基硅烷无水乙醚溶液处理玻璃管道内壁，降低流体水与管壁间的粘附功，研究了低粘附功内壁管道的内流减阻性能。 - A series of poly-nutrient and slow release/ controlled novel urea, which were harmless to soil, were made by using fertilizer-grade calcium hydrogen phosphate as coating material and PVA water solution as adhesive.
以聚乙烯醇水溶液为粘结剂，以肥料级磷酸氢钙为包膜材料，采用喷雾包涂的方法制备一种新的、多营养的、不污染土壤的缓释/控释尿素。 - The major achievements of this research are following: ( 1) The dosage of laccase, PH, activation temperature, activation time and solution chroma are the main factors that influence the laccase/ lignin adhesive preparation technology.
主要研究结论如下：（1）影响漆酶活化工业木质素制备木材胶粘剂工艺的主要参数有：漆酶用量、pH值、活化温度、溶液浓度及活化时间。 - More pressure applied to the solution and larger spinning outlet resulted in higher solution flow rate, and adhesive fibers might be obtained in extreme case.
压力较大或喷丝口直径较粗时，则会由于溶液流量的增大而造成纤维的粘连。